You are watching: Will chevy 8 lug fit ford 8 lug
Are there different bolt patterns amongst 8 lug wheels, or every they all pretty lot standard? I"m looking at a collection of provided wheels to use as roller come fit the jeep in the garage. The man who has them doesn"t know what they"re turn off of and doesnt have easy access to them to measure the bolt pattern. Thanks.
nopeFord and Chevy (and others) used 8 ~ above 6.5" earlier in the days, and also I think Chevy still does. BUT, I understand Ford changed some time in the 90s come 8 lug v a metric diameter bolt circle, no compatible.
hmmm, the axles on my jeep are a dana 60/70 from an early 90"s ford, yet I don"t recognize the specific year. What about a 2005 evade 3500? 6.5" or metric?
I think Ford to be the only one to go metric, yet I bet a tiny Google browsing would answer you question.
Chevy and Dodge still have the 6.5" pattern, it"s the SuperDuty line of van (99-up 250,350 etc) that have the metric pattern. If her axles space out of a 90s Ford, girlfriend will need older Ford or dodge wheels. Chevy wheels no fit because the center hole is too small and ns think the very same is true through wheels from the newest generation of dodge trucks. Not to cite the back spacing on the newer Dodge truck wheels is huge.Travis..
I simply put 2003 evade 8 feet rims top top a Chevy, fit just fine. Ford saw 8 top top 170 mm. There is a hole differance in part also!
Chevy and Dodge still have the 6.5" pattern, it"s the SuperDuty line of van (99-up 250,350 etc) that have the metric pattern. If your axles room out that a 90s Ford, you will need older Ford or evade wheels. Chevy wheels no fit since the center hole is too small and ns think the exact same is true v wheels from the newest generation of evade trucks. No to point out the back spacing on the newer Dodge truck wheels is huge.Travis..
WORD! as well as the FORD SuperDuty pattern every the old wheels space the very same "cept the hub hole. Ford will fit a Chevy, yet Chevy no fit a Ford.If they"re cheap enough snag them anyway, you can never have sufficient 8 lugs laying about for rollers.
WORD! aside from the FORD SuperDuty pattern all the old wheels are the very same "cept the hub hole. Ford will certainly fit a Chevy, but Chevy wont fit a Ford.If they"re cheap sufficient snag castle anyway, you deserve to never have sufficient 8 lugs laying approximately for rollers.
2nd this story........ The chevy rims have actually a smaller facility hole than thefords........... So, the chebbies won"t fit over the ford hubs, however thefords will certainly fit the chebbie hubs.......... Evade hubs room the exact same as chevy,but I"m not totally sure about their within hub-hole dia on your rims.the later fords, i think 1994-? are 8 x 170mm.......Sherpa
Originally post by LAME The guys developing cages because that the D9 dozer on her Christmas list are going around this a little bit differently means then a couple of ********, too lot beer, and also a JD2
Ford went to the 8 X 170 mm in 99, once all F250 and also F350 come to be the modern day superduty. I beg your pardon is not to be confused with the 97 and older superdutys.
I simply put 2003 dodge 8 feet rims top top a Chevy, fit just fine. Ford visited 8 ~ above 170 mm. Over there is a feet differance in some also!
Help united state cure children cancer! cut for the reason tips on how to construct your Jeep bigger!Wet Willie - stretched 1950 WillysNew build, day-to-day driver TJ ~ above 44" rubbersProject hot 40 year old
I have actually heard, no FOR sure That the 2005 and also up superduty srw truck readjusted back come 8 on 6.5, Non-metric. The dually 05 superdutys are still metric, a whole new even enlarge metric ns think is 8 ~ above 200 or 220
Whoever told ya that was smokin some real good stuff, 05"s are 8x170, very same as the enlarge S/D"s, but, the backspacing is rather different.The F450 and 550 are 8x225mm, and have been due to the fact that 99.The vans are, native what I deserve to tell, tho 8x6.5, I understand for certain that 03"s were.As for the old 8 lug wheels, like everyone else has actually said, Ford fits everything, GM won"t to the right Ford, and some evade wheels won"t fit over the hubs either. If you just need rollers, hacking the end the center is constantly an option.
See more: 100 American Dollars Banknote Series 1963 A 100 Dollar Bill Value
96 F350 XL CC PSD/5 speed 4x4... Household hauler in the making92 W250 LE, CTD/5 speed 4x4, tow pig/DD/snow pushin pig86 F250... 460/T19/1345/D60/welded 10.25, 44 Boggers, reg cab, part junk... Build
I have heard, no FOR certain That the 2005 and up superduty srw truck adjusted back to 8 top top 6.5, Non-metric. The dually 05 superdutys are still metric, a whole new even enlarge metric i think is 8 ~ above 200 or 220
The blot sample is the same, yet you could need to recenter the wheel in bespeak to gain the backspacing correct.