To use starter fluid on a snowblower, it’s essential to spray the fluid into the machine’s waiting intake. Uneven lawn mowers and other tools, snowblowers typically do not have an air filter. In most cases, the air intake is located under a plastic cover near the throttle lever. To fully access the carburetor wait intake, that often vital to take turn off the plastic cover. Then, spray the starter liquid into the wait intake because that 2–3 seconds before attempting to begin your machine.

You are watching: How to use starting fluid on a snowblower


When need to You use Starter fluid for a Snowblower?

Starter liquid should no be your very first solution when attempting to start a stubborn snowblower. If your unit i will not ~ start, an initial make certain it is sustained with clean, brand-new gasoline. If petrol from the vault year is tho in the fuel tank, drainpipe it out and also refill the snowblower v non-ethanol fuel.

Before you usage starter fluid, drain any old fuel indigenous your eye blower.Fill your snow blower through a brand-new tank that gas.Try to start your eye blower. Use the electric starter if your model has one.If this technique doesn’t work, try using starter fluid.

If her snowblower has actually an electrical start option, usage this instead of the traction start. If her snowblower doesn’t start after being filled with new fuel, the time to give starter liquid a try.

Does starting Fluid damage Your Snowblower Engine?

When provided correctly, beginning fluid won’t damage your snowblower’s engine. To prevent damages to your engine, first, use starter fluid only when you have to. If you need to use starter liquid each time you start your machine, this is a sign of a trouble that have to be repair by a mechanic. Second, spray starter liquid into your snowblower’s air intake for no an ext than 2–3 seconds. If girlfriend spray too lot starter fluid, you threat stripping oil indigenous the cylinder wall, resulting in engine damage.

Correct use of starter liquid won’t injury your snowblower’s engine.Use starter liquid only when absolutely necessary—a machine that won’t start without starter liquid needs repair.Spray starter fluid for no an ext than 2–3 secs to protect against engine damage.Use starter fuel top top carbureted gas engines only. That is not for use in fuel-injected or diesel engines.

It’s crucial that you usage starter liquid only top top carbureted, petrol engines only. Girlfriend will damage a diesel engine by using starter fluid. Starter fluid may work-related for her snowblower ~ above a cold morning, however don’t use it top top a diesel truck or tractor.

Where perform You Spray Starter fluid On a Snowblower? <6 steps for starting Your Snowblower>

Few points are more frustrating than going to begin your snowblower ~ above a cold winter morning just to have actually it sputter and also refuse to start. Meanwhile, the eye is piling up outside, specifically on the end of the driveway. Even if you’ve used starter fluid on stubborn mowers, using it ~ above a snowblower requires a various process. Here’s exactly how to obtain a snowblower began with starter fluid:

Remove the choke Cover

Snowblowers frequently don’t have air filters, definition you can’t simply open an waiting filter case and spray a tiny starter fluid into the engine intake. Instead, the air intake of most snowblowers is concealed under a protective cover. To disclose the waiting intake on your snowblower:

Locate the choke lever on your snowblower. This lever controls the air intake the the carburetor.If there is a plastic or steel cover that covers the portion of the engine close to the throttle lever, remove any type of nuts and also bolts that organize this covering in place.If necessary, remove the choke bar handle itself. This have the right to be pried off and put back on utilizing pliers.Remove the cover from the snowblower.

The cover does not have to be totally removed native the machine. As long as it allows access to the carburetor, the sheathe is sufficiently removed. Sometimes, a cable or cable killswitch attaches the cover to the blower. This walk not should be removed. Listed below is a video clip demonstrating how to eliminate this covering on a conventional snowblower.

Locate the Carburetor

With the sheathe removed, the carburetor and air intake of the snowblower need to be visible. Search for a item of steel with an upward-facing opening. Sometimes, it helps to monitor the linkage from the choke bar to the item that moves. Because the choke lever controls a section of the carburetor, you can be certain tracing the route of the system will command you come the right place.

Search for a steel piece through an upward-facing opening—this is the air intake that leads to the carburetor throat.The linkage of the choke lever frequently leads to the peak of the carburetor. The wait intake is usually just forward (closer to you) than the choke assembly. Look because that a ring or rectangular opening.

In most cases, the carburetor consists of an waiting intake port on the top side, closest come you. When you’ve discovered it, you’re all set to relocate on and also get your hard-starting engine going.

Open the waiting Intake Valve

Before spraying her starter fluid, move the choke bar to the open position. If you have actually a hard time remembering which method to relocate the bar to open the choke, inspect the cover you’ve removed. Many choke covers display a diagram through a triangle the goes from narrow to wide. Relocate the choke bar to the “wide” part of the triangle. This will open the choking and allow air (and starter fluid) to go into the carburetor.

Move the choke lever to the “open” position.Look in ~ the eliminated cover to identify which direction you require to relocate the lever to open the choke.Photograph the choke cover prior to removal because that a quick reference because that the exactly choke position.

It help to take it photographs together you go. Keep your phone call handy and also photograph the cover prior to removing it. This provides opening the choke, and also putting the cover ago on, simpler.

Spray Starter liquid Into the air Intake

Now the you’ve uncovered the air intake valve and opened the choke, spray your starter fluid directly into the air intake. Spray in short bursts about 1 2nd long. Spray 2–3 bursts right into the waiting intake. Any an ext than this won’t assist your blower start but it can damages your engine.

Spray in brief bursts, because that a complete of 2–3 seconds.The starter fluid will enter the engine as soon as you attempt a start, wherein it will burn more readily than fuel.

See more: How Are Rectangles And Trapezoids Alike, What Is A Trapezoid

The starter liquid you’ve sprayed right into the wait intake will get in the carburetor, whereby it will certainly be pulled right into the engine when you attempt a start. Unequal fuel, which vaporizes poorly in cold weather, starter fluid is a flammable liquid the vaporizes easily, an interpretation it will fire up an ext reliably than fuel.