The neutral security switch is a safety an equipment that only permits you to start your engine when the automatic transmission is in either Park or Neutral. The function of the neutral security switch is to prevent the automobile from beginning while in gear, i m sorry would cause it come launch front unexpectedly.

You are watching: 2003 jeep liberty neutral safety switch location

In the mid-1960"s, the automotive market underwent a tremendous change in regards to overall vehicle safety. Countless automotive historians suggest to the development of the Specialty equipment Manufacturers combination (SEMA) in 1963 together the moment when advances in motorsports safety started to show up in manufacturing vehicles. Usual safety tools found in motorsports such together seat belts and fuel closeup of the door off systems were developed for motorsport applications and found their way into production vehicles. Although many production vehicles have had actually a neutral security switch as beforehand as the late 1950"s, their usage on manual transmissions to be mandated by the SFI foundation and became commonplace in the early 1980"s ~ above all manufacturing vehicles.

The neutral safety switch because that an automatic infection is located inside the transmission case or in the linkage that permits the vehicle to shift gears. This switch prevents you from beginning the engine when the transmission is in any kind of gear other than Park or Neutral.

Manual transmissions have actually a similar safety maker that is frequently located top top the clutch pedal. This ensures that a hand-operated transmission automobile can"t be started unless the clutch pedal is depressed. As soon as triggered, the neutral safety and security switch enables the electrical present to cycle indigenous the ignition move to the engine starter and also ignition system which activates the ignition process. This is done to prevent damage to the starter motor and the transmission, however most importantly to alleviate potential accidents.

When the neutral safety switch or one of the components that connect the move to ancillary support systems that run the machine is damaged, there room a few warning signal or symptoms the may suggest a problem exists. Noted below room a few of these warning indications that should alert you to call a neighborhood ASE certified mechanic come inspect and also replace the neutral security switch if needed.

1. Engine will not crank in park yet cranks in neutral

When the driver transforms the ignition switch and the automatic transmission is in park, or the manual transmission is in neutral and also the clutch pedal is engaged, the auto should create the starter come engage. However, if they turn the vital under these circumstances and also the automobile does no crank over, it might be caused by a faulty neutral security switch within the transmission or clutch pedal. Due to the fact that this symptom may additionally be attributed to battery issues, damaged starters, or various other component failures, a certified mechanic will require to inspect this in human to identify the correct course of action.

2. Engine will not crank in neutral however cranks in park

On the opposite side of the spectrum, when the vehicle cranks over when the transmission in in park however not neutral, it"s commonly due come a faulty neutral safety and security switch. In this case, the move is either suffering an interior component failure whereby it is activating in one gear however not the other. That may also be as result of an electric failure or the the move is loosened and requirements to it is in adjusted. A certified mechanic have the right to repair this worry if uncovered early enough.

3. Engine does no crank at all, nevertheless of the infection gear

If the engine will not crank in ~ all, it"s common of a neutral security switch the is experiencing electrical issues. In this case, no strength is flowing v the neutral safety and security switch to the starter relay. This stays clear of the starter engine from cranking the engine. This symptom suggests a fully open electrical circuit inside the neutral safety switch which might be because of a faulty relay, blown fuse, or electrical trouble with the move itself. If the issue is through the switch, the will need to be replaced.

4. Engine cranks in any type of gear

Being able come crank the engine even when that is already running and also the infection is in gear is a sign of a neutral safety switch that has actually a quick circuit internally. When this occurs, it"s a serious safety and security hazard, as basically it"s as if over there is no neutral safety and security switch installed on her vehicle. In this case, the safety and security switch need to be changed as quickly as possible to stop serious crashes or injuries.

See more: Bank 1 Sensor 2 Location Chevy Tahoe, Oxygen Sensor Locations

If you experience any type of of the above symptoms or warning signs, it"s clever to call a trained technician favor the local ASE certified mechanics indigenous YourMechanic.


Looking for an OBD2 password reader to diagnose your check engine light?

Check out dozens of an excellent OBD2 scanners here

Buy currently usmam.org might receive a share indigenous purchases make via web links on this page. Pricing and availability is topic to change.

*